Improvements:

- Shure Integration: Support for the latest revision of ULX-D hardware.
- ... mouse cursor.

Fixes:

- Under certain circumstances, the MixRack and Surface unit names could display as “Unknown” during ... the Surface connected to the main gigaACE socket and all other Surfaces disconnected from the MixRack. Alternatively ... using a 3rd party touchscreen with Director, drag and drop in the Cue list or Scene Import list will sometimes not complete on release and will require a subsequent touch of the screen.

1. Download the latest firmware and save the .zip file.
2. Remove any ... do this, look into the USB AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other ... cable between one of the Surface gigaACE/Network ports and one of the MixRack gigaACE/Network ports.
6. ... the USB drive into the dLive USB port, and touch Update in the Firmware page. The dLive will reboot to a ‘bootloader’ screen and if valid firmware is found on the USB drive then details of the current versions and versions found on the drive will be displayed.
and connecting cables are reliable and that the system will not be disturbed or ... no Surface connected:

1. Download the latest firmware and save the .zip file.
2. Remove any ... To do this, look for a AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other ... your firmware.
4. Open a web browser and type the IP address of the MixRack into ... Select the location where you extracted the firmware and navigate to: AllenHeath-dLiveFirmwareTLD-MixRackFirmwa re
7. Select Firmware.tar.xz and press Open
8. Select Update
9. ... in firmware corruption. Make sure the mains power and connecting cables are reliable and that the system ...