Fixes:

- Under certain circumstances, the MixRack and Surface unit names could display as “Unknown” during a ... multi-surface system, firmware should be updated on one Surface at a time with the Surface connected to the main gigaACE socket and all other Surfaces disconnected from the MixRack. Alternatively the Surfaces can be updated whilst disconnected from the MixRack ... gigaACE card.

To update the firmware with a Surface connected:

1. Download the latest firmware and save ... from your computer.
5. Connect the dLive Surface to the dLive MixRack via gigaACE or Network. ... plug a Cat5 cable between one of the Surface gigaACE/Network ports and one of the MixRack gigaACE/Network ... your settings.

To update the firmware with no Surface connected:

1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your hard drive. To do this, look for a AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other files or folders.
3. Extract the .zip file to a directory on your hard drive. Do not change the folder name or browse inside the Firmware folder as doing this may cause firmware corruption. Attempting to navigate or open files within this directory may cause your Operating System to leave behind small temporary system files which can invalidate your firmware.
4. Open a web browser and type the IP address of the MixRack into the address bar (Default: 192.168.1.70)
5. Select Choose File
6. Select the location where you extracted the firmware and navigate to: AllenHeath-dLiveFirmwareTLD-MixRackFirmwa re
7. Select Firmware.tar.xz and press Open
8. Select ...