- Changed ... was used during image review.

- The focus point display would not light if the shutter-release button was pressed halfway after the standby timer had expired.

- The camera would stop responding if a command dial was used in the CUSTOM SETTING MENU > f Controls > f1 Custom control assignment > Movie record button + menu.

- If an option other than Off was selected for Active D-Lighting in the PHOTO SHOOTING MENU, pictures taken with an optional flash unit in auto aperture (AA), non-TTL auto (A), or distance-priority manual (GN) flash mode would be underexposed.

Confirming the firmware version

- Turn on the camera.

- Press the camera’s MENU button and select Firmware version from the setup menu.

- The camera's A and B firmware versions will be displayed.

- Turn off the camera.

Installation Procedure:

- Download and extract the new firmware

- Copy the firmware to the memory card

- Insert the memory card containing the firmware into the camera memory card slot.

- Turn the camera on. If you are updating flash unit firmware, turn the flash unit on as well.

- Press the to display the menus.

- Select Firmware version in the setup menu.

- The current firmware version will be displayed. Highlight Update and press the .

- A firmware update dialog will be displayed. Select Yes.

- The update will begin. Follow the on-screen instruction during the update.

- Confirm that the update was completed successfully.

- Turn the camera off and remove the memory card.

- Format the memory card in the camera.

During the update, do not:

- Remove the memory card

- Turn the device ...